DFMS · Whole-body vibration and noise module

HEMM Vibration and Noise Dose Simulator

A simulated operator seat and cab on a mining machine, processed the way the DFMS edge unit processes it: ISO 2631-1 vibration weighting with daily A(8) and VDV, A-weighted cab noise with LEX,8h and C-weighted peak, data-quality checks, events joined to the DFMS timeline, and a long-term dose ledger. Everything runs inside the mine's network.

ISO 2631-1 Wk / Wdk = 1.4 · 1.4 · 1.0EU 2002/44/EC valuesfs 400 HzNoise: A / C weightingDGMS 85 / 90 dB(A)
Machine
Ground / haul road
Seat suspension
Cab condition (noise)
Scenarios
Machine DZ-03Clock 06:00:00Logged 0 sActivity –Location –Operator –
Z vertical, Wk-weightedX fore-aft, WdY lateral, Wdlast 10 s · m/s²

Whole record · 1-s rms, Z

Whole record · 1-s LAeq at the ear, dB(A)

A(8)–m/s² · dominant axis
VDV, daily–m/s1.75 · measured
Crest factor Z–peak / rms
Method to use–VDV ratio (limit 1.75)
Noise LAeq–dB(A) at the ear
LEX,8h–dB(A) ·
Peak–dB(C) · LCpeak
At the ear with HPD–dB(A), 8 h
A(8) against EU values
00.5 action1.15 limit2.0

VDV against EU values
09.1 action21 limit40

Noise LEX,8h against DGMS levels
7085 warning90 danger100

Data-quality checks on the edge

Run on every record before any number goes to a report or a dose ledger. A record that fails is held for review, not averaged in.

    One timeline: WBV + noise + DFMS

    Vibration, noise and DFMS events share machine ID, operator ID and timestamp, so they land on the same record. DFMS entries here are simulated.

      Integration

      How WBV joins the existing DFMS, on premise

      The vibration engine runs where DFMS already runs. Raw signal stays on the machine; summaries and events travel over the site network to the mine's own server.

      In the cabSensors
      • Tri-axial seat-pad accelerometer (ISO 10326-1 position)
      • Optional floor or frame sensor for continuous screening
      • Class 2 microphone near the operator's ear (IEC 61672-1)
      • DFMS cabin cameras
      • CAN / J1939, GNSS where available
      →
      On the machine · edge unitWBV engine beside DFMS
      • Wk / Wd weighting, rms, A(8), VDV, MTVV, crest factor
      • A-weighted LAeq, LEX,8h and C-weighted peak
      • Clipping, seat-pad, microphone and idle checks
      • Raw-signal ring buffer for ISO 2631-5 and audits
      • Operator ID and seat occupancy taken from DFMS
      • Store and forward when the network drops
      MQTT
      →
      Site server roomMine-hosted platform
      • Message broker and time-series store
      • Per-operator daily dose ledger
      • Dashboard by machine, road segment, shift
      • Compliance report export (PDF / CSV)
      • Role-based access; no internet needed
      REST / MQTT
      OPC UA →
      Systems already on siteExisting tools
      • Installed DFMS or FMS (any vendor with an export or API)
      • Shift roster / HR
      • Periodic medical exam records, restricted access
      • Mine's own safety reporting

      A cloud copy (the mine's own GCP or AWS account) is optional and holds only what the mine releases. Medical records never leave the site server.

      Site situationWhat we addWhere operator identity comes fromEffort
      GoatAI DFMS already on the machineAccelerometer plus a software module on the same edge unitDFMS face match and seat occupancySensor fit and configuration
      Another vendor's DFMS installedSmall WBV logger per machine, publishing to the site server; joined to DFMS records by machine ID and timeDFMS event export or API, or FMS loginInterface review with the DFMS vendor
      No DFMS yetStandalone WBV logger and the same site serverShift roster importLowest; DFMS added later on the same unit

      Message published every simulated minute

      Long-term view

      Cumulative dose at 5, 10 and 15 years

      The current shift's A(8) becomes a daily dose. Adding those up over working years gives each operator a ledger, and each control option a measurable reduction. The chart shows dose, not a diagnosis.

      Dose unit: one action-value year is 250 days at A(8) = 0.5 m/s² (energy-equivalent, A(8)² × days). Reductions for seat, road and rotation come from this simulator's illustrative model and must be measured on site before they are quoted. Turning dose into a probability of low-back disorder needs a dose-response relation calibrated on the mine's own medical records and a cohort follow-up. ISO 2631-5 spinal dose needs the raw signal, which the edge unit keeps.

      Noise

      What each control does to the noise dose

      Noise has Indian reference levels: DGMS guidance sets 85 dB(A) as the warning level and 90 dB(A) as the danger level over 8 hours. A plug only counts while it is in the ear: taking it out for a fifth of the shift cuts its benefit from about 26 dB to about 7 dB.

      Daily dose uses the equal-energy rule (3 dB doubles the dose) with 90 dB(A) for 8 h as 100%; the edge can also report the 5 dB rule used in some Indian factory rules. Hearing-protector benefit uses SNR less 4 dB for real-world fit. Noise-induced hearing loss builds over years: pairing LEX,8h with audiometry in the periodic medical exam shows who is drifting before it becomes a notified case.

      Model parameters (vibration and cab noise levels per activity, shock rates, seat, road and cab factors) are illustrative and set to typical published ranges. They show how the system behaves; site values come from a measured pilot checked against a reference meter.